The Nutrafin Nitrate Test Kit allows you to measure the nitrate level present in your aquarium. Nitrate should be tested on a regular basis as a measure of pollution in the aquarium and to determine if a water change is necessary. Nitrate accumulates in aquariums over a period of time and is difficult to remove by conventional filtration means.
Suitable for freshwater or marine aquariums to determine nitrate level (0.0-110.0 Mg/L)
Determines level of pollution in aquarium
Essential in monitoring your tanks water quality
Nitrate levels should be tested weekly
Easy to follow directions; Contains 80 tests
Product Information Specifications for Nutrafin Nitrate 0.0 to 110.0 Mg/L for Fresh and Saltwater, 80-Tests Below:
Manufacturer: Seachem Laboratories, Inc.
Peel off the protective plastic to reveal your Lil? Alert Mate?s? yellow sensor. Place your Lil? Alert Mate? on the inside of your fish bowl or aquarium so they are peering out at you. Press the suction cup firmly to the interior of the glass. Check on your Lil? Alert Mate? daily to assure the safety of your fish. The yellow sensor will change color to tell you the condition of your water. yellow = good to go, green = time for a water changeblue = change water now!i1 Year Monitor (Treats: N/A)
Manufacturer: Seachem Laboratories, Inc.
This test kit features a unique dye that has a pronounced color change between 8.0 and 8.3, making it the easiest kit on the market to read in that critical range. Alkalinity may be read from the same sample in 0.5 meq/L increments. MultiTestâ„¢ Marine pH & Alkalinity performs over 75 tests and contains a reference sample for validation.
The Nutrafin pH Wide Range Test Kit (4.5 - 9.0) will determine the general range of pH in your aquarium. Most species of fish require specific levels of pH to survive. By classifying your water as acidic or alkaline, you can create a natural habitat for your fish. Nutrafin Wide Range Test Kit is suitable for fresh and saltwater aquariums, and helps ensure optimal water conditions for your fish.
Salifert test kits are the epitome of accuracy and precision. Their wide range of available tests have all been designed to detect the smallest traces of certain elements, without interference from other chemicals within the water. Simply put, these are the best test kits you can buy- hands down. The sharp, contrasting color changes make results easy to read so there's no second guessing. Trust your aquarium to Salifert.Accurately measure the tiniest amount of nitrite without interference from amines. For saltwater or freshwater. THIS ITEM IS NOT AVAILABLE FOR BACKORDERS
Red Sea Fish Pharm ARE21455 Marine Care Program pH/Alkalinity Test Kit for Aquarium, 100 Tests
Manufacturer: TopDawg Pet Supply
Brand: Red Sea Fish Pharm Ltd.
Red Sea pH/alkalinity test kit includes an accurate titration test for KH and a colorimetric test for pH for monitoring these essential parameters in all marine aquariums to an accuracy of 0.2 ppm. Performs 100-tests. It range is 7.6ppm-8.6ppm.
Salifert Copper Profi-Test Copper is often used as a treatment for parasite infested fish and it is essential that the correct concentration is used as too high levels can be toxic to marine fish and invertebrates. Tap water can also be naturally high in copper and it is therefore advisable to test for this on a regular basis. The Salifert test kit offers a very sensitive and accurate test for measuring dissolved or weakly chelated copper with a pH of 7.5-9. Lasts for several copper cures or provides sufficient for up to 50 tests on tap or aquarium water as a routine check. Ca be used for marine, fresh and garden pond water Strongly chelated copper will only be partly or not at all detected.Warning!KEEP OUT OF REACH OF CHILDREN. Not for consumption.Instructions: Add 2ml of water in the test vial. Add 5 drops of the Cu reagent and swirl gently for 5 seconds. Allow it to stand for 10 minutes. Some copper medications might use strongly bound copper and would require a waiting time of 20 minutes. In case of doubt compare the value after 10 and 20 minutes of waiting. The highest value should be noted. To obtain the copper concentration hold the test vial in front of you. Place the white part of the color chart firmly against the side of the test vial and look from the opposite side.A blue tinge lighter than the 0.1ppm value corresponds to approximately 0.05ppm.A color in between two color bars indicates a copper value in between those two values.Copper Table ml`s Added Copper Conc...
Ammonia and ammonium should be rapidly converted by aerobic nitrification into nitrite and then nitrate and finally into nitrogen gas. If this does not happen then either the aquarium is not fully matured or there is a problem with the tank`s biological system, which can be caused by an excessive biological loading being placed on the system. The Salifert Ammonia Test Kit measures the total amount of ammonia and ammonium quickly and accurately. Sufficient for up to 50 tests and can detect 0.5 ppm of total ammonia easily.